Digital Multimeter And Micrometer

Features:

• 3¾ Digit Multimeter with Backlight
• 3,999 Count
• Auto Power Off (APO) under natural operation
• Data Hold, Max./Min.
• NCV
• True RMS

The Fluke 179 True-rms Multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements over the original Fluke 70 Series.

• Wide 1000 V measurement range
• True-rms for precise measurement of non-linear signals
• Capacitance, resistance, continuity and frequency
• Built-in thermometer (Fluke 179 only)
• Large, easy-to-read display
• Backlight for work in dimly lit areas (Fluke 177 and 179 only)
• Min/Max/Avg to record signal fluctuations
• Display hold and auto hold
• Manual and automatic ranging.

Features:

• Analog multimeter with mirror scale
• Inbuilt buzzer and LED
• 0S2 adjustment with x 100 range
• Transistor test, HFE with diode.

We, Sunshine Instuments are the leading supplier of this product. We are based on Coimbatore, India.

• Item Code: YX-360TRE-B

We, Sunshine Instuments are the leading supplier of this product. We are based on Coimbatore, India.

• Item Code: YX-360TRE

Stroboscope is a flash - frequency velocity measuring device. It is a rotation speed measuring device that makes use of persistence of vision (when the light source synchronize with the rotation speed of an object at a pre-set flashing frequency, a relatively static phenomenon called visual persistence will occur).In the course of observation of an object that rotates or moves at a high speed ,adjust the flashing frequency of the device to synchronize it with rotation or movement speed of the object. . Although the object being measured moves at a high- speed, it appears to move slowly or static. This is an optical phenomenon of visual persistence whereby high -speed movement of an object can be easily observed with the naked eye. By using this method, the rotation speed of various rotating objects can be measured, and the movement and defect on the surface of an object can be inspected or detected. It is widely used to detect the defects on the surface and movement track of high - speed rotating objects such as various types of rotors, meshing gears, vibration diagnostic equipment as well as textiles, printing production lines etc.

Product description

• High-accuracy, Digital reading
• Large LCD for easy reading
• Instant continuity buzzer
• Overload protection on all ranges Recessed safety designed input jacks. 
• Data Hold switch freezes reading.
• Low battery indication
• Tough ABS plastic housing Diode check

Key Feature

• Large LCD for easy Reading
• Data hold switch freezesReading
• Low Battery Indication
• Continuity Buzzer
• Tough ABS Plastic Housing
• Diode Check

Features:

• High-accuracy, Digital reading 
• Data Hold switch freezes reading.
• Large LCD for easy reading
• Instant continuity buzzer
• Overload protection on all ranges 
• Recessed safety designed input jacks.
• Low battery indication
• Tough ABS plastic housing
• Diode check

Esperer Techno Commercial LLP” are Manufacturer And Exporter of an extensive array of Car Body Kit, Accessories, Bumpers, Grills, Body Kit, Front Grill, Automobile Accessories, Paddle Shifters Extension, Gear Shifter etc.  

Esperer Techno Commercial LLP” are Manufacturer And Exporter of an extensive array of Car Body Kit, Accessories, Bumpers, Grills, Body Kit, Front Grill, Automobile Accessories, Paddle Shifters Extension, Gear Shifter etc.  

Micrometer

We are engaged in supplying a wide range of Micrometer. These are used for accurate measurement of small distances, in Machining & Mechanical Engineering. Owing to this, these are used for mechanical trades and other metro logical purposes. These are designed in accordance with latest techniques, and we offer these to various Industries and Laboratories.

Apart from this micrometer we also provide:
 

• Out side micrometer (Micrometer Screw Gauge) (0.01 mm)
• Digital Micrometer, (Micrometer Screw Gauge) (0.001 mm)
• Dial Indicator Mitu-Toyo Japan Made
• Cat No. 2046 S 0-10mm x 0.01mm
• Vernier Height Gauge
• Electronic Digital Height Gauge

Features:

• Heat-insulated frame, tapered (on the anvil side) for hard-to-reach places
• With a standard except for 25 mm model
• A ratchet stop or friction thimble for a constant measuring force

Specifications:

• Item Code: 102

Features:

• Hammertone-green, baked-enamel-finished frame
• Ratchet Stop or Friction Thimble for exact repetitive readings.
• With a standard except for 25 mm model

Technical Data:

• Accuracy: Refer to the list of specifications
• Graduation: 0.01 mm, 0.001 mm, .001" or .0001"
• Flatness: 0.6μm for models up to 300 mm
• 1μm for models over 300 mm
• Parallelism: (2+R/100)μm, R = max. range (mm)
• fraction rounded down
• Measuring faces: Carbide tipped

Specifications:

• Item Code: 103

We, Sunshine Instuments are the leading supplier of this product. We are based on Coimbatore, India.

To meet the requirements of customers, we provide Micrometers that are available with several other meteorological instruments, such as dial, vernier, and digital calipers. Basically, micrometer is a device, which is widely used for incorporating a calibrated screw. Apart from this, it is used for precise measurement of small distances in mechanical engineering and machining as well as most mechanical trades.

Features:

• Out Side Micrometer (Micrometer Screw Gauge) (0.01 mm)
• Digital Micrometer, (Micrometer Screw Gauge) (0.001 mm)
• Dial Indicator Mitu-Toyo Japan Make
• Cat No. 2046 S 0-10 mm x 0.01 mm
• Vernier Height Gauge
• Electronic Digital Height Gauge

 

Specifications:

• Screw Gauge 0-25 (0.01 mm) / Micrometer             
• Screw Gauge 0-25 (0.001 mm) / Micrometer       
• Screw Gauge Digital Micrometer 0-25 mm (.001 mm)        
• Screw Gauge Counter Type Digital Micrometer 0-25 mm (.01 mm) 
• Height Gauge 300 mm dia      

 

 

Offered by us is a wide range of Stage And Oculer Micrometer. The rendered product is a circular shaped glass piece, that is present in the microscope to precisely measure the size of magnified particle or objects. Furthermore, the product have a ruled scale at the product's center, that marks the degree of magnification. In addition to this, the offered product is available to our valued patrons at reasonable and competitive rates.

 

Features:

 

• Quality approved glass

• Use to measure magnified object

• Accurate in measurement

• Smooth functioning

• Finished product

Specifications:

• Stage micrometer ERMA, japan, 0.01 mm
• Stage micrometer 0.01 mm, Indian
• Ocular micrometer disc ERMA, Japan
• Ocular micrometer disc , Japan
• Ocular micrometer graph, Japan
• Ocular micrometer disc cross line, Japan
• Camera lucida mirror type best Indian
• Camera lucida prism type best Indian

Description:

This compact photometer operates in three different ranges to cover virtually every COD application 0-150 mg/L, 0-1500 mg/L and 0-15000 mg/L. The HI 83099 Meets the design requirements of USEPA 410.4, guaranteeing high quality measurements suited for reporting purposes.

The HI 83099 can be operated manually of from a PC via the built-in  RS 232 port and data can be downloaded for analysis and documented with the HI 92000 application software

Features:

• Light Source: 4 tungsten lamps with narrow band interference filter 420/525/575/610 nm
• Light Detection: 4 silicon Photocells
• Power Supply: 2x9V battery or 12 V dc adapter
• Auto Shut-off: after 10 minutes of non-use
• Environment: to 50C (32 to 122F); RH max 95% non-condensing
• Dimensions: 230 x 165 x 70 nm
• Weight: 640 g

• Item Code: HI-93099-02

Our organization is instrumental in offering premium quality Coolant Proof Micrometer. These products are manufactured using optimum grade raw material, which are purchased from the most trusted and reliable vendor in the market. Products we offer are manufactured under proper supervision and guidance of highly skilled experts in a well segregated premise to get premium quality output.

 

Features:

 

• High performance

• Longer service period

• Optimality

Features:

• IP65 protection level, enabling use in environments exposed to cutting oil, etc
• Anti-corrosion treatment is required after use
• Measurement data output function is available with a water-resistant connection cable
• Oil-resistance materials are used in all plastic components
• ±1μm instrumental error (75 mm or less range models)
• Auto power ON/OFF function
• Certificate of inspection* is included. (50 mm or less range models)

New technology Digimatic micrometers
for use in coolant-exposed environments

• Based on new water-proof structural technology, these micrometers provide IP65 protection levels,
enabling use in environments exposed to cutting oil, etc.
• Measurement data output function is available with a water-resistant connection cable.
• Oil-resistance materials are used in all plastic components.
• ±.00005”/±1 μm instrumental error (3”/75 mm or less range models)
• Auto power ON/OFF function.
• Certificate of inspection* is included. (2”/50mm or less
range models)
*It is not the type used to obtain calibration certificates.

Specifications
Resolution .00005”/0.001mm, 0.001mm
Accuracy*1 ±.00005”/±1μm, ±.0001”/±2μm (3-4”/75-100mm)
Functions Origin setting (for ABS length measurements), Zero-setting
(for INC measurements), Data hold, Auto power ON/OFF,
Measurement data output, Error reporting
Protection IP65 (IEC60529), *Anti-corrosion treatment is required after
level use.
Flatness .000012”/0.3μm or less
Parallelism .00005”/1μm or less (0-1”/0-25mm, 1-2”/25-50mm models)
.00008”/2μm or less (2-3”/50-75mm, 3-4”/75-100mm models)
Power supply One button-type silver oxide battery (SR44)
Battery life About 1.2 years under normal use conditions
Standard One standard bar (none for 0-1”/0-25mm models), one
accessories button-type silver oxide battery (SR44 No. 938882),
one wrench

Order No. (with ratchet stop)
Order No. Range Order No. Range
293-230 0-25mm 293-330 0-1”/0-25.4mm
293-231 25-50mm 293-331 1-2”/25.4-50.8mm
293-232 50-75mm 293-332 2-3”/50.8-76.2mm
293-233 75-100mm 293-333 3-4”/76.2-101.6mm
293-240* 0-25mm 293-340* 0-1”/0-25.4mm
293-241* 25-50mm 293-341* 1-2”/25.4-50.8mm
293-242* 50-75mm 293-342* 2-3”/50.8-76.2mm
293-243* 75-100mm 293-343* 3-4”/76.2-101.6mm

• Item Code: 125

Speedy measurement is achieved thanks to 2 mm of spindle feed for every thimble revolution!
Mitutoyo is proud to have reached its leading position in the micrometer market through a spirit of innovation, imagination and creating added value.

The QuantuMike brand of micrometer, inspired by this Mitutoyo Spirit, provides users with an excellent measuring experience with higher speed, quality and stability than ever before owing to the integration of sophisticated manufacturing and processing technologies.

Features:

Speedy measurement:

Faster measurement is achieved by using a coarser thread which feeds the spindle by 2 mm per revolution of the thimble instead of the standard 0.5 mm. This increase in thread lead has been made possible thanks to new high precision thread-cutting and test techniques.
Trials show that a reduction in positioning times of 60% and measuring times of 35% can be obtained, compared with a conventional micrometer.

Repeatable measurement:

The patented ratchet thimble mechanism* helps ensure repeatable results by transmitting microvibrations along the spindle to the contact face to provide a constant measuring force and encourage good contact with the workpiece. The ratchet works from the thimble as well as the speeder so it is always easy to use - even when making measurements one-handed. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.

Technical Data:

• Accuracy: ±1μm
• (excluding quantizing error)
• Resolution: 0.001 mm, .00005