Hanna Products

The HI98193 portable dissolved oxygen meter has extended ranges of up to 50 ppm and 600% saturation. When measuring dissolved oxygen, compensations for salinity, temperature and pressure are essential to improve the accuracy and precision of readings. Salinity compensation allows for direct determination of dissolved oxygen in saline waters. Temperature compensation is automatic with the probes built-in sensor, which features a one or two-point calibration. Pressure compensation with the meter’s built-in barometer can be validated against a reference barometer, and if needed, can be recalibrated in userselectable units (mmHg, inHg, atm, psi, kPa, mbar). With the internal barometer, the HI98193 is able to compensate for changes in barometric pressure so there is no need for charts, altitude information or external barometric pressure information. Other features include measurement, methods and calculations for BOD, OUR and SOUR.

• Waterproof to IP67 (including probe sockets).
• Large dot matrix display with backlight.
• On-screen calibration instructions.
• Log on demand (400 samples)
• USB for data download (cable and software supplied).
• Automatic calibration at one or two points (0% & 100%)
• Salinity and Altitude compensation
• Reads in DO; BOD; OUR and SOUR
• Built-in calculations for all measurements
• Auto Temperature compensation.
• GLP and on screen help.

Extensive DO Capabilities:

• The HI5421 is a research grade dissolved oxygen bench meter with extensive capabilities in measuring DO as well as BOD (Biological Oxygen Demand), OUR (Oxygen Uptake Rate), SOUR (Specific Oxygen Uptake Rate) and temperature.
• DO measurements can be performed with ppm, mg/L or in % air saturation units of measurement and feature automatic or manual temperature and atmospheric pressure compensation, as well as manual salinity compensation. 
• The HI76483 12mm DO probe uses the polarographic principal of measurement and has a built-in temperature sensor.

The Hanna HI-991300 and HI-991301 Low and High Rangemeters each wrap pH, Conductivity, TDS and temperature into a single meter with a simple two button operation that is easy to use even in tough weather conditions.

Main Benefits:

• Three parameters plus temperature – all in one meter using one probe
• Tutorial messages for calibration and set up on clear LCD display
• Probe connection on bottom of case for better balance
• Designed for use in tough weather conditions
• Automatic temperature compensation.

The Hi 96801 Digital refractometer is a rugged potable, water resistant device that benefits from HANNA'S Years of experience as a manufacturer of analytical instruments. The HI 96801 is an optical instrument that employs the measurement of refractive index to display the <<< sugar content >>> in samples. The measurement of refractive index is simple and quick. Samples are measured after a simple user calibration with deionized of distilled water. Within seconds the instrument measures the refractive index of the sample and converts it to % Brix concentration units. The HI 96801 digital refractometer eliminates the uncertainty associated with mechanical refractometers and is portable for measurements in the field. The measurement technique and temperature compensation employ the methodology in the ICUMSA Methods Book (International Commission for Uniform Methods of <<< Sugar >>> Analysis). Temperature (in °C or °F) is displayed simultaneously with measurement on the large, dual level display along with other helpful message codes.

Features:

• Wide Range The HI 96801 is versatile enough to fit most applications
• Easy Measurement Place a few drops of the sample in the well and press the READ key
• Calibrate with Water Fill the sample well with distilled of deionized water and press the ZERO key
• Automatic temperature Compensation (ATC)
• Battery Operated The HI 96801 is operated by a single 9V battery for portability
• Dual-level LCD The dual-level LCD displays the measurement as well as temperature readings simultaneously
• Waterproof the HI 96801 offers IP65 waterproof protection
• Quick, Precise Results Readings are displayed in approximately 1.5
• Small Sample Size The HI 96801 is able to read samples as small as 2 metric drops.

Descriptions:

• The HI-93732N is a half way house between simple chemical test kits, and more sophisticated and expensive electronic meters and sensors. It measures the dissolved oxygen content of water by measuring the intensity of yellow which develops in water after a chemical reagent has been added.

Description:

We are the trusted exporters, importer and manufacturer of a wide range of Digital D.O. Meters. These are manufactured using latest technology and used in varied industries. We offer an exclusive range of Digital D.O. Meters to our customers. These are used to evaluate oxygen liquefy in water and index of biological and physical processes in water. With the specification of power 230V A.C. 50 Hz and range between D.O. 0 to 20.0 PPM, these are highly durable and accurate.

 

Esperer Techno Commercial LLP” are Manufacturer And Exporter of an extensive array of Car Body Kit, Accessories, Bumpers, Grills, Body Kit, Front Grill, Automobile Accessories, Paddle Shifters Extension, Gear Shifter etc.  

Key features:

• Low range tester for measuring samples such as clean water and tap water
• Dual level display for simultaneous readings
• Easy to use two button operation
• Bright floating waterproof case
• Direct contact temperature probe
• Replaceable graphite electrode snap-in probe
• Removable safety cap

Features:

• Large LCD displays stability indicator, low-battery indicator, and calibration tags
• Waterproof casing that is designed to float
• Automatic Temperature Compensation (ATC), displays temperature in °C or °F
• Graphite sensor reduces polarization effects and does not oxidize
• HOLD button to freeze readings on the display
• BEPS alerts users of low battery power that could adversely affect readings
• Automatic shut-off with three user controlled settings

Features:

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two button design
• Application specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one ortwo points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (°C or °F)
• Auto-off function
• Battery life indication and low battery detection.

Features:

• pH electrode, amperometric EC/TDS sensor, and temperature probe in a single meter
• pH range is from 0.00 to 14.00 pH
• Automatic Temperature Compensation (ATC), displays temperature in °C or °F
• Large LCD displays stability indicator, low battery indicator, and calibration tags
• HOLD button for easier measurement recording
• Graphite sensor reduces polarization effects and does not oxidize
• Battery Error Prevention System (BEPS)
• Automatic shut-off with three user controlled settings.

Tips for an Accurate Measurement:

• Ensure the sample does not contain any debris.
• Whenever the cuvette is placed into the checker, it must be dry outside and free of fingerprints, oil and dirt.
• Wipe the cuvette thoroughly with HI731318 microfiber cleaning cloth or a lint-free cloth prior to insertion.
• Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
• Do not let the reacted sample stand too long after reagent has been added, as accuracy will be affected.
• Discard the sample immediately after the reading has been taken or the glass might become permanently stained.

Designed to bring simplicity to pH testing during the any process, the HI98103 Checker® pH Tester is designed for direct measurement. A replaceable electrode extends the life of your tester.

• ±0.2 pH accuracy
• Comes with all the necessary solutions and batteries- everything you need to get started measuring right away.
• Great for all brewers, from professional to home brewers

Key features

• Heavy-duty waterproof casing
• Large clear LCD display
• Extended pH and temperature given simultaniously
• Memorises pH reading and recall
• Battery % remaining on start up
• User-friendly text and graphics support calibration procedure without constant reference to a manual
• Automatic temperature compensation
• Rubberised keyboard
• Fully automatic buffer recognition
• Automatic pH calibration with five memorised pH buffer values and buffer recognition to simplify calibration
• User-selectable calibration time-out
• Battery error prevention system (BEPS)
• HI-7662 stainless steel temperature sensor included as standard
• HI-1230B double junction pH electrode minimises junction contamination and enhances accuracy (supplied as standard)

Key features:

• Extra wide LCD displays pH & temperature
• Standard pH range: -2 to 16pH with 0.01 resolution
• Wide temperature range: -9.9°C to 120°C
• On-screen step by step calibration guide
• Calibration expiration reminder helps users make sure the meter is in optimum working order each and every time.
• pH calibration with stability indicator makes process error free
• Sturdy wide-based casing with easy to use buttons for quick efficient testing
• Automatic temperature compensation
• Measurement memory / memory recall function.

HI 99181 is a portable, microprocessorbased pH and temperature meter with a special probe. The HI 1414D/50 probe has been specially designed with flat tip for skin pH measurement. Moreover, a built-in temperature sensor allows simultaneous pH and temperature readings and a mini amplifier renders measurements impervious to noise and electrical interferences. The meter is supplied in a rugged carrying case, complete with:

•  HI 1414D/50 pH/temperature probe with flat tip, 50 mm-long body, DIN connector and 1 m (3.3') cable
• HI 70004 pH 4.01 buffer, 20 mL sachet
• HI 70007 pH 7.01 buffer, 20 mL sachet
• HI 700620 cleaning & disinfection solution for skin residuals, 20 mL sachet (2 pcs.)
• HI 700621 cleaning solution for skin grease and sebum, 20 mL sachet (2 pcs.)
• batteries and instructions.

 

The HI 93703 portable microprocessor-based turbidity meter provides lab-grade accuracy even in the field. With 4 keys and weighing only 500 grams, HI 93703 measures turbidity from 0 to 1000 FTU (NTU)*. For best field accuracy, it measures from 0 to 50 FTU in steps of 1/100th of FTU. This is 10 times better than comparable models on the market that measure 10 to 50 FTU only in decimal points. The meter meets the ISO 7027 requirements.

Esperer Techno Commercial LLP” are Manufacturer And Exporter of an extensive array of Car Body Kit, Accessories, Bumpers, Grills, Body Kit, Front Grill, Automobile Accessories, Paddle Shifters Extension, Gear Shifter etc.  

The HI 9033 is a rugged meter designed to hold up under extended use in wet, humid, dusty and muddy conditions. This meter has the advantage of measuring samples from deionized water to brine without having to switch or recalibrate the probe.

This instrument performs measurements with Automatic Temperature Compensation which adjusts for the effects of temperature on the probe. HI 9033 also feature HANNA’s BEPS (Battery Error Prevention System) technology that alerts the user when low batteries could affect the readings.

Features:

• Multiple conductivity ranges
• Automatic Temperature Compensation
• BEPS (Battery Error Prevention System)

Model Overview:

• Range: 0.00 to 2.50 mg/L(5.00 mg/L) Some meters allow the user to extend the range to the value between the brackets

Making it quicker and easier to take quick-
 re measurements this pocket-sized pHep
from Hanna allows the user to simply dip the
tester into a solution and take a reading.
Useful features include an easy read digital
display, rugged and ergonomic casing and
long battery life.  Hanna introduced the world’s  rst pocket
pH meter in 1986 – revolutionising pH
measurement and doing away with the
need for litmus testing. Today’s pHep is the
result of over two decades of continuous
research and development.
• Easy dip and read design
• Clear display giving pH to 0.1 resolution
• Non-clogging  bre junction increases life-span; simply pull out 1-2 mm of the
junction  bre to completely renew the junction
• Spare electrodes and range of bu er solutions available
Product Code HI-98107
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy ±0.1 pH
Calibration manual, 2 points
Battery Type 4 x 1.5V
Battery Life approx. 700 hours of continuous use
Environment 0 to 50°C ; RH max 95%
Dimensions 175 x 41 x 23 mm
Weight 95 g

Features:

• pH probe with built-in temperature sensor
• Waterproof keyboard and display
• Robust case design
• Easy to clean probe resists clogging
• Easy dual button operation
• 1500 hour battery life (approx.)

Accurate And Affordable Chlorine Measurement:

• Chlorine is the most common water disinfectant. The monitoring of chlorine is crucial in applications such as swimming pools and spas, fruit and vegetable sanitation, disinfection and drinking water. By monitoring this crucial parameter, serious health and safety risks can be avoided.
• The HANNA HI 711 and HI 701 Checker® HC’s bridge the gap between simple chemical test kits and professional instrumentation. Chemical test kits are not very accurate and only give 5 to 10 points resolution while professional instrumentation can cost hundreds of dollars and can be time consuming to calibrate and maintain. The HANNA HI 711 and HI 701 Checker®HC’s are accurate and affordable.
• The contoured style of these Checker®HC’s fit in your palm and pocket perfectly and the large LCD is easy to read. The auto shut-off feature assures the battery life will not be drained if you forget to turn it off.
• The HI 711 and HI 701 Checker®HC’s are extremely simple to use. First, zero the instrument with your water sample. Next, add the reagent. Last, place the vial into the Checker®HC, press the button and read the results. It’s that easy.

The HI 9124 and HI 9125 heavy-duty waterproof pH meters have been designed with the latest microprocessor technology to provide laboratory results and accuracy under harsh industrial conditions. The large multi-level LCD displays the pH and temperature (°C or °F) simultaneously. Graphic symbols are provided to help the user during the calibration process. The pH calibration procedure is automatic with 5 standard buffer values (4.01, 6.86, 7.01, 9.18 and 10.01), buffer recognition to avoid errors, and automatic temperature compensation. HI 9125 can be used with ORP (Oxidation Reduction Potential) electrodes. The resolution automatically switches from 0.1 to 1 mV when the reading exceeds 700 mV. As in the HI 9126, these meters utilize BEPS (Battery Error Prevention System) technology, which automatically turns the instrument off when the battery level is too low to ensure reliable readings. HI 9125 and HI 9124’s batteries are recharged using the included inductive docking station.

Extended Operation:

• Long Battery Life HI 9126, HI 9125 and HI 9124 have an extended battery life (up to 200 hours) to guarantee long operation in the field.
• Rechargeable Batteries with Inductive Recharger When the batteries are low, you don’t have to worry about carrying a spare set with you—the batteries can be recharged with HANNA’s inductive recharger. Simply leave the meter on the recharger for a few hours and you’re ready to go. The recharger can be plugged into a standard 115V or 230V socket using the appropriate HANNA adapter

Tips for an Accurate Measurement:

• Ensure the sample does not contain any debris.
• Whenever the cuvette is placed into the checker, it must be dry outside and free of fingerprints, oil and dirt.
• Wipe the cuvette thoroughly with HI731318 microfiber cleaning cloth or a lint-free cloth prior to insertion.
• Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
• Do not let the reacted sample stand too long after reagent has been added, as accuracy will be affected.
• Discard the sample immediately after the reading has been taken or the glass might become permanently stained.

 

Features:

• With 1 or 2 channels, internal or external sensor, with or without LCD
• At a glance, you can assess the current temperature, channel and status of the logging sequence according to your programed instructions
• Number of samples taken
• Countdown until the start of logging
• Number of samples which have exceeded the HIGH/LOW alarms
• HIGH and LOW temperature values
• HIGH and LOW alarm setting

Get best price of Temperature Logger for Rs 100/-

Specifications:

Other Details: