HTC Oscilloscope and Clamp Meter

• Vertical two channel, bandwidth of each channel is 25Mhz, 60Mhz,100Mhz
• Real-time Max Sampling rate is 500MSa/s.
• Support communication interface RS232, USB(main sub), RJ45 LAN
• Input attenuation 2mV/div ~ 50V/div,  Easy to measure big signal 5.7 inch color display screen. 

• Highest Sensitivity up to 1mV/div (After Expand)
• Full band Trig Auto Sweep Circuit
• Flex Trig mode (Select either CH1 or CH2 Signal / External Signal)
• Alt-Trig View 2 in relative signal
• Ext Trig Input.

• Highest Sensitivity up to 1mv/div (After Expand)
• Full band Trig Auto Sweep Circuit
• Flex Trig mode (Select either CH1 or CH2 signal / External Signal)
• Alt-Trig View 2 in relative Signal
• Ext Trig Input.

Features:

• Vertical two channel, bandwidth of each channel is 25Mhz, 60Mhz,100Mhz
• Real-time Max Sampling rate is 500MSa/s.
• Support communication interface RS232, USB(main sub), RJ45 LAN
• Input attenuation 2mV/div ~ 50V/div, Easy to measure big signal
• 5.7 inch color display screen.

• 3¾ Digital Clamp Meter
• 4000 Counts
• Auto/Manual Range
• Data Hold
• Auto Power Off(Can Disable)
• Capacitance, Frequency and Temperature
• 1000A AC/DC
• Backlight
• True RMS

• 3 ¾ Auto Range 
• Digital Dual Display AC Clamp Multimeter 
• Clamp opening size : 45mm

• Small Scale
• High Trig Sensitivity
• Easy to Operate
• High Performance / Price f Ratio

• Digital-code sweep switch
• Height Y Sensitivity
• Power Supply : AC 200 10%V

• 3 ¾ Digits Display 
• 4000 Counts
• CE CAT III 600V
• Data Hold ,Continuity & Diode Test 
• Auto Range or Manual Range Selection
• Max. Jaw Size : 57mm
• Low Battery Indication, over Range Indication, polarity Indication
• DCA Auto Zero Adjustment.

•  3 ¾ Digits Display 
•  4000 Counts
•  CE CAT III 600V
•  Data Hold Function 
•  Auto Range or Manual Range Selection
•  Max. Jaw Size : 57mm
•  AC Current 1500A(CM-2100)
•  AC Current 1500A(CM-2200)
•  Auto Power Off

• 3 ¾ Auto Range 
• Digital Dual Display AC Clamp Multimeter

• 1 ml. Solution measurements
• Standard Glass Filters
• Highly Stable & Accurate

HTC - 5030 & HTC - 5030C

Features:

• Highest Sensitivity up to 1mV/div (After Expand)
• Full band Trig Auto Sweep Circuit
• Flex Trig mode (Select either CH1 or CH2 Signal / External Signal)
• Alt-Trig View 2 in relative Signal
• Ext Trig Input
• Power Supply : AC 200 ±10%V

Specification :

Band Width:-
AC 10Hz~30MHz(-3dB)
DC ~ 20MHz (-3dB)

Y Deflection:- 5mV / div ~ 10V / div

Rise Time:- <18ns，Mag x 5Accuracy:<5%

Max Input:- 400V(DC+ACp-p)

Sweep Mode:- Auto, Trig, Lock, Single

Sweep Rate:- 0.1μs/div ~ 0.2s/div l—2—5 20 steps, error ±5％

Trig Source:- Y1, Y2, ALT, Line, Ext, TV-H,TV-V

Min Sync. Level:- Trig DC ~ 30MHz，Int. 1 div,
Ext. 0.2Vp-p，TV Int. 2div,
Ext. 0.3Vp-p Trig Lock (50Hz ~ 10MHz) Internal 2div

 Freq. Response:-
AC : 10Hz ~ lMHz -3dB
DC : 0 ~ 1MHz -3dB

Z Max. Input  :- 400V (DC+ACp-p)

Amplitude:- 0.5Vp-p ±2%

Component Test (5030C Only) :- Capacitor, Coil, Zener, Diode

Min Input Level :- TTL Lavel

WaveForm:- Rectangle

Frequency:- 1KHz ±2%

 Standard Accessories  : Power Chord, Two 20MHz Oscilloscope Probes, Manual

Dimension                      :320(H) x 130(W) x 400(D)mm

• Item Code: 5030