Mextech Products

Application:

• Widely used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machiningof packed grains, Feedstuff, Foodstuff etc. 

Application:

• Widely used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains etc.

Applications:

• Widely used in data collection for boiler, refrigeration industry, ventilation duct, environment monitor, navigation measurement, weather forecast, collection of the weather datum for outdoor busywork and fire department

Applications:

• Used for Measuring Thickness of Non Magnetic Coating (Anodizing, Varnish Paint, Enamel Plastic Coating, Powder etc.) on Non Magnetic Materials.

Key Features:

• Measurement Units Air Velocity: m/s, km/h, ft./min, knots.
• Air Flow: CMM(m3/min) CFM(ft3/min).
• Beaufort scale: Force; Wave Height: m.
• Temperature: Degree Celsius & Degree Fahrenheit.
• Data hold: Maximum or minimum value.
• Data memorized: 24 groups.
• Sampling Rate: Reading per second approximately.
• Sensors: Air Velocity & Flow Sensor.

Thermo Hygro Clock

• Digital Humidity, Temperature, Time & Calendar Meter.
• Large LCD Display showing Temp, Humidity & Time(Two Modes 12/24) at same time.
• Recording Max/Min Humidity & Temperature value automatically.
• Two modes for temperature showing: deg C or deg F.
• Alarm function and Calendar function.
• Jumbo Display.

Features:

• Two Line Display
• Time and Date Display Function
• Max/Min Memory
• Button Function: 4 Buttons 1) MODE, 2) ADI, 3)°C/°F, 4) MAX/MIN
•  C and  F Selectable
• Low Battery Indication

Features:

• Display :LCD Display with Backlight
• Zero Adjustment Key.
• Low battery indication
• Fuse Protection.
• Backlight Shut down after 7 Sec.

Applications:

• The “F” Probe Measure the Thickness of Non-Magnetic Coating (Paint, Plastic, Porcelain, Enamel, Copper, Zinc, Aluminium, Chrome etc) on magnetic materials(Iron, Nickel etc)
• The “NF” Probe Measure the Thickness of Non-Magnetic Coating (Anodizing, Varnish Paint, Enamel Plastic Coating, Powder etc.) on Non-magnetic materials.

Application: Used for measuring thickness of non magnetic materials (paint, Plastic, Porcelain enamel, copper, zinc, Aluminium, Chrome etc) on magnetic Material (iron, nickle) 

Digital Surface Roughness Tester is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machineryprocessed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.