Moisture Meter and Tester

 Specification:

• Digital shore a hardness tester, Model No.6510 A, 4 Digit-10 mm LCD Display, Imported
• Range : 10~90H,
• Resolution : 0.1, Test Specimen Min 6 mm Thick, Auto Off,
• Power Supply : 4 x 1.5V AA (UM-3)
• Battery To Measure the Hardness of : Rubber, Elastomer's, Silicon Substances, Soft Plastic, Felt, Leather
• Digital shore D hardness tester, Model No.6510 D, 4 Digit-10 mm LCD Display, Imported
• Range : 10~90 H,
• Resolution : 0.1, Test Specimen Min 3 mm Thick, Auto Off,
• Power Supply : 4 x 1.5V AA (UM-3) Battery To Measure the Hardness of : Plastics, Formica, Plexiglas, etc
• Surface Roughness Tester, Model No.SRT-6210,. 4 Digit-10 mm LCD Display, with blue / Black Light Imported Sensor : Inductance Type, Radus of Probe Pin : 5, Material of Probe Pin : Diamond Parameters : Ra, Rq, Rz, Rt.
• Measuring Range : Ra, Rq : 0.005 ~ 16.00um / 0.020 ~ 629.9 inch, Rz, Rt : 0.020 ~ 160.0um / 0.078 ~ 6299 inch
• Digital vacuumGAUGE, Range : 25-0 Microns Model TPI-605
• Digital vacuum GAUGE, Range : 25-0 Microns Model TPI-606
• Digital Electronic Thickness Gauge Mitu-Toyo Japan Model : 700-110sue
• Range : 0-12 mm/0.01 mm, 700-122sue
• Range : 0-25 mm/0.01 mm
• Wet Film Thickness Gauge (upto 0.004") Circular Type
• Dry Film Thickness Gauge (Dial Indicator Type)

Application:

Hardness Tester is designed to measure th e penetration hardness of rubber, elastomer and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials.

Specifications:

• Shore D is designed for plastics, Formica, Epoxies and Plexiglas s.
• Product info : digital durometer for shore hardness testing pocket size model with integrated probe
• Test scale : shore hardness
• Standards : DIN53505, ASTMD2240, ISO7619, JISK72 15
• Parameters displayed : hardness result, average value, max. value
• Measurement range : 0-100HA(HD)
• Measurement deviation : 1%H
• Resolution : 0.1
• Auto switch off With RS232C interface
• Operating conditions : 0? to 40?
• Power supply : 4x1.5V AAA (UM-4) battery

Our customers can avail from us a comprehensive range of Soil Moisture Tester Takemura, which is specifically manufactured by the vendors so as to fulfill the requisite demands of customers. This range does not require battery for operation and is a new analog pH & soil moisture meter. Our range starts its operation by pressing the cone in the soil and later on it starts inspecting the soil moisture and pH (acidity) level of the soil. Furthermore, we make sure that this range is inspected for any flaw or defect before providing them to patrons.

Features:

• Large LCD display
• Quick response
• Low battery display
• with DATA-HOLD button

• Previous
• Next

Key features

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Data hold

Key features

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

Product overview: Fluke 101 Digital Multimeter

• Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

Key features

• Extremely rugged – 3-meter drop tested, IP54 for dust and moisture
• Precise dual-lasers for more accurate, repeatable measurements
• Provides up to a 12:1 Distance to spot ratio

Product overview: 62 MAX+ Handheld Infrared Laser Thermometer

• The Fluke 62 MAX+ Handheld Infrared Laser Thermometer delivers the accuracy you need in an extremely rugged package. Just point, shoot, and read the temperature of many types of equipment. Get accurate readings form transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents.

• Item Code: CD-611

Key features

• AC current measurements up to 400 A, handling your everyday electrical maintenance needs
• Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
• Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

A Precision instrument for testing the winding density of textile cones, bobines, quills and package dyeing tubes. The indenter tip is 2.5 mm or 5mm.in spherical depending up on the winding density.

Available with us is a comprehensive assortment of best quality Rubber Hardness to our esteemed customers manufactured using superior quality material and with skilled engineers and other workforces. Our available calibrators are offered in elegant designs and long lasting features at competitive market prices and on time deliveries.

Features:

• Good Accuracy
• Made as per Customer Satisfaction
• Designed for heavy duty

Specifications:

To obtain standard Reading from Hardness Testers and to save time in checking mass scale.

We are a preeminent manufacturer, supplier and exporter of a broad spectrum of superior quality Hardness Tester for Rubber.The range made available by us comprises of best quality in international standard with perfect design and high durability that are sourced from the most authentic vendors of the market. Offered at affordable prices, our product-line is applauded for its attractive sizes, perfect finishing and eminent durability.

 

Features:

 

• High Durability

• Superb accuracy

• Very long service life

• Handles large pressure and variable temperature

Fruit Firmness Tester: 6003D
Our Fruit Firmness Tester (also known as a Fruit Pressure Tester) is a penetrometer that measures fruit firmness and provides a quick, easy and, according to university studies, accurate method to determine fruit maturity.

General Features & Specification:

• For Apples, Pears, Avocado, Kiwi, Tomatoes, etc.
• RANGE: 0-20 kg / 44 lb
• SENSITIVITY: 0,5 kg
• Firmness, or degree of softness or crispness, is used world wide as a test of ripeness and maturity of many fruits. The Fruit Tester can be used as either a hand-held instrument or mounted on a test
• and for more precise measurements.
• RUGGED CONSTRUCTION:
• High impact plastic case, aluminum dial, precision steel spring, brass mechanism chassis, impact resistant plastic crystal, stainless steel plunger and accessories. Parts disassemble for easy cleaning.

SPECIFICATIONS:
"Peak Firmness Hold" button automatically freezes the highest reading until released by push button that returns the pointer to zero. Dual Graduations; reads in Pound and Gram. Accuracy: +- 2 graduations through 2500 grams; +- 1 graduation over 2500 grams (all models).
Spare parts included: 8 mm (5/16") and 11 mm (7/16") stainless steel plunger tips, protection (splash) plate, fruit peeler, manual, use recommendations, and carrying case.

• Item Code: 6003D
• Pay Mode Terms: T/T (Bank Transfer)

Fruit Firmness Tester: 6003B
Our Fruit Firmness Tester (also known as a Fruit Pressure Tester) is a penetrometer that measures fruit firmness and provides a quick, easy and, according to university studies, accurate method to determine fruit maturity.
RANGE: till 5 kg.
SENSITIVITY: 20 grams.
RUGGED CONSTRUCTION:
High impact plastic case, aluminum dial, precision steel spring, brass mechanism chassis, impact resistant plastic crystal, stainless steel plunger and accessories. Parts disassemble for easy cleaning.

SPECIFICATIONS:
"Peak Firmness Hold" button automatically freezes the highest reading until released by push button that returns the pointer to zero. Dual Graduations; reads in Pound and Gram. Accuracy: +- 2 graduations through 2500 grams; +- 1 graduation over 2500 grams (all models).
SPARE PARTS INCLUDED:
8 mm (5/16") and 11 mm (7/16") stainless steel plunger tips, protection (splash) plate, peeler, manual, use recommendations, and carrying case.

• Item Code: 6003B
• Pay Mode Terms: T/T (Bank Transfer)

Descriptions:

Although we are apt to think that proper amounts of manure and moisture added to the acidity or alkalinity or moisture deficiencies will inhibit the effective absorption for nutriments, Therefore, to grow good crops, careful attention must be paid to the relationship between soil acidity and moisture.

Soil and its Relation to Crop-Production:

In order to form soil which is able to absorb manure effectively, it is necessary to neutralize the soil, i.e, -by mixing lime with it.However, if soil liming is excessive, manganese will be depleted, and manganese deficiency will occur. As a result, the usefulness of the soil may be lost completely. Therefore, when liming, it is important to add only the proper amount for neutralization. Before the application for lime the pH value must be determined-the pH reading indicates its hydrogen ion concentration.

Specifications:

Key features

• Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
• Automatically calculates Polarization Index and Dielectric Absorption Ratio
• Makes repetitive tests simple and easy with a Compare (Pass/Fail) function 
• Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V

Product overview: Fluke 1507 Insulation Resistance Tester

• The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.
• Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.

Specifications:

We offer Waterproof PH Testers.

Features:-

• Ideal for Quick Routine pH Testing
• Microprocessor Based
• User Replaceable Sensor with Long Lasting Capability
• 3-point Push Button Calibration
• Auto-buffer Recognition
• Up to ±0.1 pH Accuracy
• Freeze and Auto-off Functions
• Automatic Temperature Compensation
• Self Diagnostic Messages

Features:

• User-Friendly
• Large, Easy-To-Read LCD
• Auto-Calibration
• Automatic Temperature Compensation
• All Push-Button Operation
• Bouyant, IP67 Waterproof Housing.

Specifications:

SHORE - A:

• Indenter: Truncated Cone.
• Least Count : 1⁰
• Test Piece : 25^0,,50^0,75^0,
• Tester for Soft Rubber and
• Soft Plastics.

 

SHORE - D:

• Indenter: Truncated Cone.
• Least Count : 1⁰
• Test Piece :50⁰
• Tester for Hard Rubber, Hard Plastics, Graphite, Bakelite, Fibre etc.
• Conforms to:
• American Standard ASTM - D 2240
• German Standard DIN - 53505

Specifications:

• Utility - Checking brinell hardness of metals such as Steel, Cast Iron, Copper, Brass, Bronz, Aluminum etc.
• Technical Data - Brinell Ball 10 mm dia. Standard Test Bar , Magnifier Hardness Tables book.
• Thickness Guage - with exact compress able to check thickness of elastic and compressible materials

Features:

• Digital Tablet hardness meter adopts force gauge  principle with motorized control.
• Automatic Peak value hold facility enables the user to find at which point the tablet breaks.
• Display Reversing facility available for better viewing.
• Blue back lit display provides clear visibility while measuring in low light conditions.
• Measurement ranging from 0.01 kg to 20.00 kg.
• Manual Zero Facility at any point.
• Measurement can be done in three modes of operation. A.Kg B.Newton C.lbs

• Item Code: TBH-20

Leeb Hardness Tester HT140
Functions & Features
High Stability and precision With Built In Printer Rechargeable LI-on Battery and Auto power off function Direct Calibrate on HL, HRC,HB, And freely switch to 8 different scales Automatically identify 7 types of impact devices for special application Test at any angle and direction, even upside down Convertion to Tensil strength (U.T.S)Optional PC software for data transmission , analysis and measurement reposrt printing
Measure materials Steel & Cast Steel Alloy Tool Steel Stainless steel Gray Cast Iron Nodular cast iron Cast Alluminum Alloy Copper Zinc Alloy (brass)An Alloy of Copper and Tin,Copper (bronze)Forged Steel

• Item Code: HT140
• Pay Mode Terms: T/T (Bank Transfer)

Descriptions:

A handy, tough and direct dial reading type tablet hardness tester working as pair of pliers, generates breaking force in single grip.
The instrument offers ac curable and reproducible result much faster other conventional hardness tester.

Specifications:

• Item Code: PHYZER

Leeb Hardness Tester HT110

Functions & Features

l Menu operation, convenient and simple.

l Hardness standards HL,HRB,HRC,HB,HV,HS all can be shown on the screen.

l Small, portable, and accurate. Suitable for harsh operating environment, anti vibration, shock and

electromagnetic interference.

l Can calibrate HL,HRC,HB.

l On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal materials,

accurate measurement value stability.

l Instantly showing the hardness measurement, and can be used in different formats conversion between

hardness of freedom.

l Can be configured to 8 different impact device, automatic identification device for impact type, replaced

without the need to re-calibrate.

l Large screen LCD display, menu operation, information rich, intuitive.

l High brightness LED back-light, convenient in the dark.

l Low power consumption Auto sleep, automatic shutdown function of saving energy.

l Ordinary alkaline battery, standby time 150 hours.

Application Fields

l The bearings and other parts, heavy workpiece, metal material, pressure vessel, failure analysis of turbine

generator unit and equipment.

l Mechanical or permanent assembly components have been installed, the test space is very narrow,

requires the original record regular test results.

l Large workpiece within a wide range of more rapid test measurement site.

Measuring Materials

l Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy,

copper zinc alloys (brass), an alloy of copper and tin, copper (bronze), forged steel.

Technical Specification

• Item Code: HT110
• Pay Mode Terms: T/T (Bank Transfer)

Features:

• User-Friendly
• Large, Easy-To-Read LCD
• Auto-Calibration
• Automatic Temperature Compensation
• All Push-Button Operation
• Bouyant, IP67 Waterproof Housing

Used to finding the hardness of sponge, soft rubber and plastic. It is also used for low density textile windings. It is not recommended for use on foamed latex.

Descriptions:

A handy, tough and direct dial reading type tablet hardness tester. It generates breaking force in single grip.The instrument offers accurate and reproducible result much faster other conventional hardness tester.

Specifications: