Caliper Product

Features:

• The main scale jaw is a round bar that facilitates measurements of tube wall thickness
• With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• Excluding quantizing error for digital models
• Resolution*: 0.01 mm or .0005"/0.01 mm
• Graduation**: 0.05 mm
• Display*: LCD
• Length standard*: ABSOLUTE electromagnetic induction
• linear encoder
• Max. response speed*: Unlimited
• Battery*: SR44 (1 pc.), 938882
• Battery life*: Approx. 3 years under normal use
• Dust/Water protection level*: IP67
• Digital models, Analog models

Function of Digital Model:

• Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory for Digital Model:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

 

Specifications:

 

Features:

Can measure width of grooves and lands inside bores and recesses

Technical Data:

• Accuracy: ±0.03 mm
• Graduation: 0.02 mm

Specifications:

Features:

The slider moves only when the spindle loaded thumb clamp is depressed
Can measure OD, ID, depth, and steps

Technical Data:

• Accuracy: Refer to the list of specifications.
• Graduation: 0.05 mm, 0.05 mm (1/128”) or .001” (1/128”)
• High accuracy type:0.02 mm or 0.02 mm (.001”)

Specifications:

• Item Code: 531

Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers. It keeps track of its origin point once set. Whenever turned on, the large LCD screen displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology as well as no more care for over speed errors.

Features:

• Large and clear LCD read out
• The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point)
• Data Hold Unit (959143) is optional
• Carbide-tipped jaw type calipers are also available

Technical Data:

• Accuracy: ±0.02 mm (≤200mm), ±0.03 mm (≤300 mm)
• ±0.05 mm (≤600mm), ±0.07 mm (≤1000mm)
• (excluding quantizing error)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Repeatability: 0.01 mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type
• linear encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3.5 years under normal use
• Function
• Origin-set, Zero-setting, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory:

• 959143: Data hold unit
• 959149: SPC cable with data switch (1 m)
• 959150: SPC cable with data switch (2 m)

Absolute Low Force Caliper (Series 573)

Features:

• Due to the low measuring force these calipers are ideal for elastic or resilient workpieces such as plastic parts and 573 rubber parts that standard calipers cannot measure
• With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type
• linear encoder
• Measuring force: 0.49 N to 0.98 N (50 gf to 100 gf)
• Jaw retraction: 0.3 mm
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3.5 years under normal use

Function:

• Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory:

• 959143: Data hold unit
• 959149: SPC cable with data switch (1 m)
• 959150: SPC cable with data switch (2 m

Specifications:

Features:

• Specially designed for center to center distance measurements on the same and offset planes.
• Can also measure from edge to center.
• Hole diameter should be in the range of 1.5 mm - 10 mm (.06"-4").
• With SPC data output. (series 573)

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution*: 0.01 mm or .0005"/0.01 mm
• Graduation**: 0.05 mm
• Display*: LCD
• Length standard*: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed*: Unlimited
• Battery*: SR44 (1 pc.), 938882
• Battery life*: Approx. 3 years under normal use (1 year: 310 mm model)
• Dust/Water protection level*: IP67
• *Digital models **Analog models

Function of Digital Model:

• Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory for Digital Model:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

Specifications:

Features:

• The moving jaw can be rotated to measure sectioned shafts
• With depth bar

Technical Data:

• Accuracy: ±0.05 mm
• Graduation: 0.05 mm

Specifications:

Features:

Can measure wall thickness inside bores and recesses.
With SPC data output. (series 573)

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Graduation: 0.05 mm
• Display: LCD
• Length standard: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3 years under normal use
• Dust/Water protection level: IP67
• Digital models, analog models

Function of Digital Model:

Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessory for Digital Model:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

Specifications:

We are the leading supplier, importer, exporter & trader of the Digimatic.
Brand - AerospaceSize - 0-150mm/200mm/300mmMaterial - Plastic /Stainless SteelDigital /Mechanical

Features:

• The range of applications can be expanded by using the interchangeable jaws (optional).
• Quick and easy exchanging of jaws due to the unique clamping mechanism. (A pair of clamping wheels are standard accessories)
• Provided with preset function for setting a desired starting point, which allows direct readout of offset measurements.
• With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Display: LCD
• Length standard: ABSOLUTE electromagnetic induction linear
• encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 5.000 hours in continuous use
• Dust/Water protection level: IP66
• Standard accessory: Jaw clamps (2 pcs.), 05GZA033

Specifications:

• Item Code: 552

Features:

• Specially designed for inside measurements in hard-to-reach places
• With SPC data output. (series 573)

Technical Data:

• Accuracy: Refer to the list of specifications (excluding quantizing error for digital models)
• Resolution : 0.01 mm or .0005"/0.01 mm
• Graduation : 0.05 mm
• Display : LCD
• Length standard : ABSOLUTE electromagnetic induction linear encoder
• Max. response speed : Unlimited
• Battery : SR44 (1 pc.), 938882
• Battery life : Approx. 3 years under normal use
• Dust/Water protection level : IP67
• Digital models : Analog models

Function of Digital Model:

Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessory for Digital Model:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

Specifications:

Features:

• Main scale jaw can be slid up and down to facilitate measurement of stepped sections. (Hard-to-get-at dimensions such as A, B, C can be accurately measured)
• With depth bar
• With SPC data output. (series 573)

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Graduation: 0.05 mm
• Display: LCD
• Length standard*: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed*: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life*: Approx. 3 years under normal use
• (1 year: 300 mm model)
• Dust/Water protection level: IP67
• Digital models, analog models

Function of Digital Model:

• Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory for Digital Model:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

Specifications:

• Item Code: 573_536

We are the manufacturer and supplier of Skin Caliper to our esteemed client.


Specifications:

• Townley measuring caliper graduated in mm and inches
• For internal and external measurements
• 11.5 cm/4.5"

Features:

• The carbide-tipped jaws facilitate fine scribing on workpiece
• With depth bar
• With SPC data output. (series 573)

Technical Data:

• Accuracy: Refer to the list of specifications (excluding quantizing error for digital models)
• Resolution: 0.01 mm or .0005"/0.01 mm
• Graduation: 0.05 mm
• Display: LCD
• Length standard: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed : Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3 years under normal use (1 year: over 300mm model)
• Dust/Water protection level: IP67 Digital models Analog models

Function:

• Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessory:

• 05CZA624: SPC cable with data switch (1 m)
• 05CZA625: SPC cable with data switch (2 m)

Specifications:

We are engaged in proving high quality Point Caliper to the valuable customers. The products are processed under the strict supervision of highly skilled team of professionals. The long functional life of the Point Caliper is making it demandable in the market. The product we are giving to the customers at minimal cost.

 

Features:

 

• Low maintenance
• Easy to use
• Rust free

Features:

• Plastic construction for durable and lightweight use
• Also ideal for use in Lab, wood-shop, nursery, doctor's, office, etc

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution: 0.1mm or .001"/0.1mm
• Display: LCD
• Length standard: Electrostatic capacitance type linear encoder
• Max. response speed: 1800mm/s
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 2 years under normal use

Function:

• Zero-setting, Power on/off
• Alarm: Low voltage, Counting value composition error

Specifications:

Inch/metric:

Features:

The Absolute Digimatic snap caliper features a spring-loaded mechanism to allow quick and efficient GO/NO-GO
mminspection for mass production parts
With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• (excluding quantizing error for digital models)
• Resolution: 0.01mm or .0005"/0.01mm
• Repeatability: 0.01mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type
• linear encoder
• Measuring force: 7N to 14N (700gf to 1400gf)
• Jaw retraction: 2mm
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3.5 years under normal use

Function:

Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessory:

• 959143: Data hold unit
• 959149: SPC cable with data switch (1 m)
• 959150: SPC cable with data switch (2 m)

Specifications:

Features:

• New designed dial movement for ultra smooth sliding and high shock protection
• Titanium coating is applied to the sliding surface to strengthen the durability (except for 0 - 300mm and 0 - 12" model). No 20wearing by 100,000-time sliding test
• Can measure OD, ID, depth, and step
• Clamping screw atop the slide
• Special models available with carbide-tipped OD and ID jaws

Specifications:

• Item Code: 505