Industrial Meter

Key features

• 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 M???; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ??? to 400 ???
• Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
• Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.

Features:

We provide highly efficient rapid moisture meter which is basically used for quick determination of moisture percentage of materials in powder form like:

• Soil
• Sand
• Coal
• Cement

 

The apparatus is offered in polished wooden carrying case and includes:

• Pressure vessel with clamp for sealing

 

Rubber sealing gasket:

• Pressure gauge in moisture content 0-25% or 0-50% on wet weight basis

• A counter poised balance to weigh the sample
• A scoop for measuring carbide reagent
• One cleaning brush

• Set of 4 steel balls and one bottle of calcium carbide (500 gm)

It is manufactured in accordance with IS: 2720, and can be delivered within stipulated time frame

Features:

• Tension & compression capability
• 20 Kg, wide capacity, high resolution, high accuracy, high repeatability
• 3 kind display unit, Kg/LB/Newton
• Separate sensor
• Peak hold ( Max. load ) measurement
• Zero button can operate both for normal & " peak hold " operation
• Full capacity zero (tare) capability
• Fast/Slow response time
• Positive or reverse display direction
• Hand held & stand mounting
• Microprocessor circuit & exclusive load cell transducer
• Over load protection
• Wide capacity, high resolution, high accuracy,high repeatability
• Positive or reverse display direction select
• Full line accessories ( adapters ) are included
• 3 kind display unit. * Hand held & stand mounting available
• Tension & compression capability
• Low power consumption gives long battery life.
• Peak hold ( Max. load ) can be held in display during make tension or compression measurement
• Build in low battery indicator
• Microprocessor circuit & exclusive load cell transducer
• Zero button can operate both for normal measuring & the " peak hold " operation
• Over load protection
• Full capacity zero (tare) control capability
• RS-232 computer interface ( optional )
• Fast/Slow response time push button

Product Description:

Gloss Meter is complete according with international standards.

Applications:

• The surface Luster measure for printing ink, oil paint, bake lacquer, coat woodwork and others
• The surface luster measure for construction decoration materials: Marble; Granite; Glass chemical Polishing brick, pottery brick and etc
• The surface luster measure for plastic, sheet and others
• The surface luster measure for other non-metal materials

Technology parameter:

• Projecting angle: 60
• Measure range 0˜200Gu
• Measure range: 0.4Gu/30 min
• Value error: 1.2 Gu
• Power: DC9V
• Environment temperature 0˜40
• Relative humidity: ≤85%
• Dimension: 114x70x38 mm

Esperer Techno Commercial LLP” are Manufacturer And Exporter of an extensive array of Car Body Kit, Accessories, Bumpers, Grills, Body Kit, Front Grill, Automobile Accessories, Paddle Shifters Extension, Gear Shifter etc.  

• Item Code: AR-851

We are the Dealers of Digital Altimeter.

Specifications:

• Time Accuracy: +/- 60 second a month

Digital Compass

• Degree Range: 0 to 355 degree
• Degree resolution: 5 degree
• Degree accuracy : +/- 10 degree
• Direction mode: 8 direction

Altitude Meter:

• Altimeter Range -703 to 4191 meter -2306 to 13245 (depends on Barometer readings)
• Display range:-4703 to 8191 meter(-1.25 feel to 26865 (feet)
• Display value = measure value reference value
• Where reference value ranging from (-4000 to 4000 meter)
• If measurement = 100 meter using altimeter set-reference stage can change display from -603 meter to 4091 meter
• Altimeter resolunon:1 meter/5 feet
• Bar Chart rate:05 min /15 min 130 min/1 Sour

Barometer:

• Barometer Range: 601 to 1100 mbar/hPa
• Barometer resolution: 1 mbar
• Barometer accuracy: +/-20 mbar
• Sampling rate: 2 sec(for First 15 sec), 1 minute (afterwards)
• Bar chart rate: 05 min 15 min/30/1 hour

Thermometer:

• Range:-10 to 60 degree C
• Resolution: 0.1 degree °C

Chronograph:

• Count up timer up to: 23:59 to 59:99
• Timer resolution: 1/100 second
• Memory size : 10 Split dates

Features:

• Waterproof anti-roll design
• IP67 waterproof housing keeps tester good even under wet conditions
• Unique anti-roll ribbed design ensures firm grip

This calorimeter is non-recording and flow type in which calorific value is ascertained from the rise of temperature imparted to a measured quality to gas.

Specifications:

• Pressure Governor
• Non-recording 1 liter flow meter and is supplied with 2 liters and 50 ml measuring jars
• Three thermometers and flexible tubing
• Range:1000-26000 k cal/m² and 120-300 B. Thu/C.ft
• Type:Pressure Governor , 0-75°c Thermometer and 0-50°c x 1°c Thermometer

We are the Suppliers of COD Photometer.

Specifications: 

• ST-COD (Chemical Oxygen Demand index) sealed tubes ready for use
• Suppression of chloride interference
• up to 1000 mg/l (LR & MR)
• up to 10000 mg/l (HR) 3 ranges
• Low range: 0 - 150 mg/l, meets ISO 15705:2002
• Middle range: 0 - 1500 mg/l, meets ISO 15705:2002
• High range: 0 - 15000 mg/l Leveling Box Assembly

We, Sunshine Instuments are the leading supplier of this product. We are based on Coimbatore, India.

Features:

• Bomb Certified By R.T.C(Govt. lab)for hydraulic pressure
• Water jacket with puff insulation
• Offset stirrer unit
• Flexible Tube(For gas filling)
• Benzoic acid of known calorific value and other standard accessories (As per list attached)

• Item Code: RSB-64A

Scale: a/c milky white

Standard Range:

Digital Bomb Calorimeter with new easy fit gas filling system and integrated controller with printer

Specifications:

• Bomb Body and lid are fabricated from corrosion-resistant Stainless steel alloy
• Extremely easy to use Push fit type Gas Filling System
• First times in India
• Each Bomb tested at a pressure of 300 kg/cm2 for 10 minutes
• Calorimeter Vessel & Water Jacket made of Chromium Plated Copper
• Safety Relied Valve for user safety
• New Soft Control Fine Regulating valve with Built-in Pressure
• Latest design Compact stirrer for customer convenience and to minimize heating effect
• New Digital Temperature Indicator With Built in Printer
• High mechanical standard & easy controls
• Accurate, reliable & user Friendly

Description:

The head is fitted with a two speed elevating mechanism for quick and precise positioning of the penetration tip. Penetration is shown on a 150mm dial, graduated 400 × 0.1mm increments, equipped with a slipping clutch pointer. The machined aluminum base has an integral spirit level.

Supplied with 47.5g standard plunger, 50g and 100g plunger weights, and instruction manual.

Applications:

• ASTM D1831: Standard test method for roll stability of lubricating grease
• ASTM D5: A standard needle or cone penetrates the sample, under standardized conditions of loading, time and temperature.
• ASTM D217: Cone Penetration of Petrolatum
• ASTM D937: The penetration of a product is the depth, in tenths of millimeter, that a standard needle or cone penetrates the sample, under standardized conditions of loading, time and temperature.
• ASTM D1321: Standard test method for needle penetration of petroleum waxes
• ASTM D1403: Standard test methods for cone penetration of lubricating grease using one-quarter and one-half scale cone equipment
• ASTM D2884: Penetration by cone penetration method
• IP 49: Penetration of Bituminous Minerals
• IP 50: Determination of cone penetration of lubricating grease
• IP 179: Determination of cone penetration of petroleum
• IP 310: Determination of cone penetration of grease - One-quarter and one half scale cone method
• IP 376: Determination of needle penetration of petroleum wax
• BS 1377: Methods of test oils for civil engineering purposes
• BS 2499 Part 3: Methods of test
• BS 2000 Parts 49, 50 & 179: Part 49: Determination of needle penetration of bituminous material. Part 50: Determination of cone penetration of lubricating grease. Part 179: Determination of cone penetration of petrolatum
• DIN 51 579: Needle Penetration of Petroleum Waxes
• DIN 51 580: Cone Penetration of Petroleum
• ISO 2137: Cone Penetration of Petrolatum
• NF T60-132: Cone Penetration of Lubricating Grease
• NF T66-004: Penetration of Bituminous Materials
• NF T60-119: Cone Penetration of Petroleum
• JIS K2220: Grease Working Machine - hand-operated type
• EN 1426: Penetration
• NF T60-140: Cone Penetration

Specifications:

• Display: 150 mm dial, 400 × 0.1 mm increments
• Penetration Range: 0 to 400 Pen (40 mm)
• Retention/Release: Manual
• Size (H × W × D): 67 cm × 30 cm × 33 cm
• Weigh: 7kg 

We are suppliers of Handheld Colorimeter Free Chlorine.

HI 701 Checker® HC Handheld Colorimeter - Free Chlorine

Features:

• EPA approved DPD method
• ±0.03 ppm ±3% of reading accuracy
• 0.01 ppm resolution, 250 points
• Large, easy to read digits
• Auto shut off
• Dedicated to a single parameter
• Small size, big convenience

 

Specification:

 

We are suppliers of Auto Calorimeter.

 Specifications:

• Rang: 400 nm to 700 nm
• Filters: Standard glass Filters
• Display: 16x2 line alpha numeric LCD %T 000 & ABS 2.00
• Accuracy: 1ml
• Stability: ±0.01 OD
• Light source: 6.8V, Amp.Tungsten Lamp
• Detector: Selenium Photocell Photo Detector
• Warm-up- time: 5 minutes
• Power: 2305±10% 50 Hz A.c
• Dimension: 225x210x110 mm

• Item Code: LT-114

We are one of the leading Exporter, Trader & suppliers of Microprocessor UV / VIS Spectrophotometer , Digital pH Meter, Photo Colorimeter, Conductivity Meter, Dissolved Oxygen Meter, Water / Soil Testing Kit, Spectrophoto Meter, Turbidity Meter, TDS . Salinity Meter, Digital Colony Counter, Karl Fisher Titrimeter, Digital Potentiometer, Flame Photometer, Microprocessor Instruments Etc. We are among the very few names in the field of Instrumentation to offer latest technology Instruments for Agriculture, Aqua Culture, Biotechnology, Cement, Chemical, Chemical & Labs, Dairy, Fertilizers, Food & Beverage, Hospitals, Iron & Steel, Industrial Water Disposal, Mineral Water Plant, Metallurgy, Mines & Geology, Pollution Control, Petro Chemical, Plants & Dyes, Pharmaceuticals, Potable Water Plants, Sewage Plants, Textile.

Featured with Latest technology & designed to meet the needs of modern industry. our products are widely used in laboratory . Being one of the leaders for over two decades, we have constantly upgraded our technology and offered excellent after-sales service

Specifications:

Common Features:

pH :

• Automatic calihralMn with one up to three buffers out of nine per-programmed pH buffers
• Reads pH with 0.01 pH resolution

mV :

• Features mV calibration for accurate ORP measurements
• Reads potentials with 1mV resolution

Conductivity :

• Extend conductivity range; to measure the full range from 0.01us/cm to 1000 mS/cm requires 3 electrodes 0.1, 1 and 10 cm.
• Selectable reference temperature: 20° or 25°C.
• Automatically selects correct range and frequency
• Automatic cell constant determination with any of three preprogrammed standards (0.01, or 1M KCI

Dissolved oxygen (only in TPCD 17):

• Operates with a galvanic oxygen electrode requiring no polarization time and no zero calibration
• Reads dissolved oxygen with 0.01 mg/l or 0.1% resolution
• Rapid air calibration
• Manual salinity compensation 0-40ppt
• Manual air pressure compensation 8000-1200 hPa

Temperature:

• Reads temperatures with 0.1°C resolution
• Manual or automatic temperature compensation
• Calibrates temperature probe for quality measurements

Inputs:

• One common input for pH and mV
• One common unput for conductivity & dissolved oxygen
• One input for a Pt1000 automatic temperature probe
• Low voltage DC input for a mains adapter

Display:
 

• Bright LCD screen for better readability.
• A white back light automatically illuminates when operated on the mains.
• Stability indicator prompts the user when readings should be taken
• The interactive LCD screen provides step by step in st-ructions in the language of your choice (English, Dutch, French, German).
• Shows a AGLP report on the LCD screen

Data-logging:
 

• Storage memory for 300 values including temperature

Cabinet:
 

Robust dust and splash proof cabinet.

Specifications:

TPC 17

TPCD 17

• Item Code: TPC-17

Platelet counts can be done manually or using automated cell counters. Since many laboratories use instruments that count platelets, red cells and leukocytes concurrently, a platelet count is a routinely reported result on many samples of dog and horse blood.

We are the Dealers of Temp MV Meter.

Specifications:

pH:

• Range: O TO 14 pH
• Resolution: 0.01 pH
• Accuracy: +0.01 oG?(Relative)
• Temp.Comp: Automatic with temp. Probe & manual by keys
• Buffer Recognition: 4.oo,7.oo,9.20ph(automatic)
• slope adjustment: 80% to 120% byu derfault 100%
• Calibration: Manually

mV(ORP):

• Range: 0 To ±1999mV
• Resolution: 1mV
• Accuracy: ±1 mV
• Caliobration: Manual

Temperature:

• Range: 20C to +200C
• Resolution: o.1C
• Accuracy: ±0.2%
• Input Type: Pt 100
• Calibratian: Manual
• Display: 16x2 alphanumeric lcd.
• Display Format:temp & ph or temp &orp simultaneously auto display of selected buffer
• Setting: By soft touch keys
• Storage: 1000 samples with date & time
• Interfacer: RS-232 centroes & computer
• Real Time Display: 24 hour mode with date
• Error Indication PH error, buffer error, orp error
• Power Supply 230 V±10% AC 50 HZ
• Digital Output: Serial RS-232 and Parallel Centronics
• Print Format: All Data and Date wise

• Item Code: LT-49